You’ve just taken out your sleek voopoo vape pod, excited for a smooth puff of vapor, only to press the fire button and—nothing. No vapor, no hit, just silence. Frustrating, right?
You’re not alone. Many vapers, both beginners and experienced users, face the issue of a Voopoo vape not firing. The good news? Most of these problems can be fixed without replacing your device. From minor connection issues to overlooked settings, troubleshooting your vape doesn’t need to be complicated.
Imagine your voopoo vape pod working like new again—consistent hits, smooth vapor, and no interruptions. With a few simple checks and adjustments, you can revive your device and get back to enjoying your vaping experience without the hassle of constant breakdowns.
In this comprehensive guide, we’ll cover every possible reason why your voopoo vape pod might not be firing and show you step-by-step solutions. By the end, you’ll know exactly what to do to fix it, prevent future problems, and extend the life of your device.
Why Is Your Voopoo Vape Not Firing?
When a voopoo vape pod refuses to fire, the problem usually comes down to one of these categories:
-
Battery Issues – Dead, uncharged, or poorly connected batteries.
-
Pod or Coil Problems – Burnt coils, loose pods, or improper installation.
-
Connection Issues – Dirty contacts or poor conductivity.
-
Device Settings or Safety Locks – Accidental lock mode or wattage misconfigurations.
-
Firmware or Chipset Malfunctions – Internal software glitches in the device.
Let’s dive deeper into each and show you how to fix them.
Step 1: Check the Battery
Is the Battery Charged?
It may sound obvious, but often the reason your voopoo vape pod isn’t firing is simply a low or dead battery. Connect your vape to its charger and check if the charging light turns on.
-
If the light doesn’t appear, try a different cable or adapter.
-
If the battery doesn’t charge at all, it could be defective and may need replacement.
Is the Battery Making Proper Contact?
Dust, e-liquid residue, or worn-out connectors can prevent the battery from connecting with the pod. Gently clean the battery contact points with a cotton swab dipped in rubbing alcohol. Let it dry before reassembling.
Step 2: Inspect the Pod and Coil
Is the Pod Properly Installed?
A loosely seated pod won’t trigger the firing mechanism. Remove the pod, check for debris, and reinsert it until it clicks into place.
Is the Coil Burnt Out?
If your voopoo vape pod produces no vapor or a burnt taste before stopping, the coil may be burnt. Signs include:
-
Dark, burnt-smelling cotton
-
Harsh throat hit
-
No vapor production
Replace the coil with a fresh one and make sure to prime the coil (apply e-liquid directly to the cotton and let it soak before use).
Pod Leakage Issues
Sometimes e-liquid leaks into the contact points, disrupting conductivity. Use a tissue or cotton swab to dry the contacts before reinserting the pod.
Step 3: Review Device Settings
Fire Button Lock
Some Voopoo devices have a lock feature to prevent accidental firing. If your vape isn’t firing, check whether it’s in lock mode. Typically, you can unlock it by pressing the fire button quickly 5 times.
Wattage Settings
If your voopoo vape pod has adjustable wattage, using the wrong wattage for your coil can cause it not to fire.
-
Low wattage: Coil won’t heat up properly.
-
Too high wattage: Coil burns instantly.
Check the recommended wattage on the coil and adjust accordingly.
Step 4: Connection & Contact Troubleshooting
Clean the 510 Connection
The 510 connection between the pod and device can become dirty with e-liquid residue. Use a Q-tip and isopropyl alcohol to clean both the pod and device connection points.
Check for Bent Pins
If the pins in your device are bent, the pod won’t sit correctly, causing misfires. Inspect carefully and, if safe, gently realign them with a small tool.
Step 5: Firmware and Chipset Issues
Some advanced Voopoo models use the GENE chip, which occasionally glitches. If your voopoo vape pod has a screen and isn’t firing:
-
Try resetting the device (usually by pressing the fire button with adjustment buttons simultaneously).
-
Check if there’s a firmware update available on the Voopoo website.
Step 6: Advanced Troubleshooting
Airflow Sensor Problems
Certain voopoo vape pod models use auto-draw sensors instead of buttons. If your device isn’t firing when you inhale, the airflow sensor might be clogged.
-
Blow gently into the mouthpiece to dislodge any blockage.
-
Clean the airflow holes with a toothpick or soft brush.
Short Circuit Protection
Voopoo devices are designed with safety in mind. If the screen displays “short” or the device blinks when trying to fire, the coil may be defective or incorrectly installed. Replace the coil and try again.
Overheating Protection
If your vape has been used heavily, it may refuse to fire until it cools down. Allow it to rest for 10–15 minutes before trying again.
Preventing Voopoo Vape Problems
Keep Your Device Clean
Regularly clean the pod connections and battery contacts to avoid build-up that prevents firing.
Use the Right E-Liquid
Thick e-liquids can clog coils quickly. Stick to the recommended VG/PG ratio for your voopoo vape pod.
Replace Coils on Time
Most coils last 1–2 weeks, depending on usage. Don’t wait until the coil burns out completely before replacing it.
Store Properly
Avoid leaving your voopoo vape pod in extreme heat or cold. Always store it upright to prevent leaks.
When to Replace Your Voopoo Vape Pod
If your device constantly misfires despite all troubleshooting, it may be time for a replacement. Signs it’s time to upgrade:
-
Battery no longer holds charge.
-
Persistent misfires even with new pods/coils.
-
Cracks, leaks, or physical damage to the device.
FAQs About Voopoo Vape Not Firing
Why is my Voopoo pod blinking but not firing?
This usually means a low battery, short circuit, or pod misconnection.
Can a burnt coil cause my vape not to fire?
Yes. A burnt coil can disrupt conductivity and trigger the device’s protection mode.
How do I know if my airflow sensor is broken?
If button firing works but auto-draw doesn’t, the sensor may be blocked or faulty.
Conclusion
A voopoo vape pod not firing can be frustrating, but it’s rarely the end of the device. Most issues boil down to simple fixes: charging the battery, replacing the coil, cleaning the contacts, or unlocking the fire button. By methodically troubleshooting, you can bring your device back to life and avoid unnecessary replacements.
Remember:
-
Always check the basics first—battery and pod connection.
-
Replace coils regularly and clean your device.
-
Use the right settings and e-liquid for your voopoo vape pod.
With proper care, your Voopoo vape can last a long time and deliver consistent performance. Follow this guide, and you’ll never be stuck with a non-firing vape again.